Today we are going to introduce the technical description of All-position TIG welding trolley.

technology, equipment stability is extremely high

Advanced inverter technology, high precision digital control system

Optimized partitioning technique, each program can be divided into multiple intervals        

Current slow up/slow down process control technology, welding molding welll.                                        Welding process parameters are displayed in real time

All Chinese color LCD display, menu management interface

Control and call welding parameters through remote control

Remote control program call/start/stop/modify parameters/gas detection

All position pipe under TIG welding condition; Tube plate welding;

control function

current control

Accurate current rise and fall process control

Interzone control is available. All current control parameters can be set between partitions

The current change in each interval can be "gradual" or "jump".

Current fine-tuning can be realized during welding

   Torch rotation control

Partition constant speed, all walking parameters can be set between partitions

   arc-length control

All arc length parameter Settings can be controlled between partitions. Automatic arc length control is optional

Precise control of arc length lag start time

The arc pressure or arc length can be fine-tuned during welding

Welding gun point vertical, horizontal control

Swing control

The residence time range of the left and right edges

The position where the yaw lag begins can be precisely controlled

The fine tuning of swing center can be realized in the welding process

  Wire feed control

Wire feeding mode: constant speed, pulsation. Pulsation synchronizes with current

Automatic or manual wire feeding is optional

Interzone constant speed, pulsation control, all wire feeding parameters can be set interzone

The time or position of wire feed lag can be controlled precisely

   programmed operat

Intuitive programming: For example, "pipe diameter", "welding speed" and other parameters are displayed in actual measurement units

Controller panel programming, all welding parameters can be set, each protection prepass and lag time, parameters of different intervals can be adjusted separately, including peak base value time, peak base value current, arc pressure, workpiece speed and Angle, wire feed speed, wire feed lag time, wire feed back time, current step mode of different intervals, swing speed, swing width;

Use wire controller operation, welding parameters can be fine-tuned by wire controller during welding