Submerged arc automatic flat/fillet welder

Range of application

Suit0Hz input, butt joint, lap joint and fillet weld of tank bottom plate

Suitable material: carbon steel, high strength steel, stainless steel, etc.

Applicable plate thickness: above 6mm

Applicable beveling type :I groove, V groove, K groove, lap joint beveling

Suitable for: flat welding, fillet welding, lap welding, fillet welding in the flat position.

Φ1.0-Φ1.2mm×1.0mm

Suitable Wire: Φ2.0-Φ5.0mm  wire diameter

Φ1.0-Φ1.2mm×1.0mm Submerged arc welding of shredded wireapplicable welding technology: 

automatic submerged arc welding, shredded wire submerged arc welding

The middle panel at the bottom of the storage tank is formed by submerged arc welding with shredded wire (10-12mm) after manual welding or gas shielded welding.

Two sets of welding characteristics output CC/CV(dropping characteristics/constant pressure characteristics).

It is suitable for the welding function of external corner joint of storage  tank.

SAW walking trolley without the aid of tread, no track, effective welding of internal and external corner joints.