main technical parameters

1) motor power:N=7.5KW, n=960rpm

2) Speed of the knife dish: n=31-161rpm,4gears

3) Range of materials used: Pipe outside diameter: Dr=Ø159-Ø800mm

wall thickness : 10-150mm

4) Angle adjustment range of tool rest:0-35°

5) Feeding speed:0; 0.10; 0.25mm/r 3gears

6) frequency control axial movement speed:50-400mm/r

Axial movement distance:300mm

7) Beveling type:single v; double v; U and etc.

8) knife dish diameter:D=850mm

9) Machine height: H=1140mm

10) Machine weight: G=5500Kg.

technical requirements

1) With M20 anchor bolts

2) The depth of the foundation is determined by soil bearing capacity. The depth is 500mm when the soil bearing capacity is 8T/㎡. If the ground endurance is insufficient or more than 8T/㎡, the depth should be adjusted accordingly.

3) The foundation is 200# concrete reinforced concrete,250# fine stone concrete is poured in the reserved hole.